Type C Multilayer Ceramic Chip Capacitors
Overview Type C multilayer ceramic chip capacitors are available in various sizes (0402, 0603, 0805, 1206, and 1210) and temperature coefficients (COG, XZR, ZSU, and YSV). Key Features Nickel barrier/solder terminations, RoHS compliant, and available on tape and reel. Capacitance Range COG: 0.5 pF to 0.012 uF, XZR: 150 pF to 0.33 uF, ZSU: 6800 […]
Thin-Film RF/Microwave Inductor Technology Accu-Le Series L0603 AND LO805 SMD High-Q RF Inductor Accu-L
Overview The Accu-L series SMD inductor is based on thin-film multilayer technology, providing consistent characteristics within a lot and lot-to-lot. It is designed for high-frequency applications, particularly in the telecommunications industry. Key Features Ultra-tight tolerance on inductance, RF power capability, low DC resistance, high SRF, and high Q. Applications Vehicle location systems, mobile communications, satellite […]
Select 270 Type Fixed Resistors
The 270 Type fixed resistors are designed for high wattage applications, featuring rugged lead-free vitreous enamel coating and all-welded construction. These resistors are equipped with lug terminals suitable for soldering or bolt connection, making them suitable for rugged applications. Key Features: Power Ratings: 12W to 1000W Ohmic Values: 0.1Ω to 101KΩ Terminals: Solder coated radial […]
Thin-Film RF/Microwave Inductor Technology Accu-Le Series L0603 AND LO805 SMD High-Q RF Inductor Accu-L
Overview The Accu-L series SMD inductor is designed for high-frequency applications, offering tight tolerance, low DC resistance, and high Q. It is suitable for telecommunications, vehicle location systems, mobile communications, satellite TV receivers, and 5G applications. Key Features Ultra-tight tolerance on inductance, RF power capability, low DC resistance, high SRF, and high Q. Applications Telecommunications, […]
100″ X .100″ Latch/Ejector Header Wall, Straight & Right Angle, High Temp Option
Overview This datasheet describes a 100″ x .100″ latch/ejector header wall, available in straight and right angle configurations, with a high temperature option. Key Features Optional ejector latches, mounting holes for securing the header to the board, and solder tail and wrap tail options are available. The header also features polarizing posts and a choice […]
74F241 Octal buffer (3-state)
Overview The 74F241 is an octal buffer designed for driving bus lines and buffer memory address registers. It features two output enables, each controlling four 3-state outputs that can sink 64 mA and source up to 15 mA. Key Features Octal bus interface 3-state buffer outputs High current capability: 64 mA sink, 15 mA source […]
Single Phase Bridges
Overview This datasheet provides information on Single Phase Bridges from Microsemi, organized by ascending current rating (Amps) followed by ascending voltage rating (Volts). Key Features The bridges are available in various packages, including GSO420B1EB1, G5320B1E81, and others, with rated currents ranging from 200A to 1000A and rated voltages from 200V to 800V. For specific VF […]
3M Four-Wall Header 3000 Series 100″ x 100″ Latch/Ejector, Straight and Right Angle
Overview The 3M Four-Wall Header 3000 Series is a high-temperature, polarized connector system designed for military and industrial applications. Key Features The header features a latch/ejector system, straight and right-angle versions, and optional polarizing posts. It is suitable for “no-lead” soldering operations and reflow soldering using “paste-in-hole” techniques. Physical Characteristics The header is made of […]
Surface Mount Aluminum Electrolytic Capacitors NACZ Series
Overview The NACZ Series of surface mount aluminum electrolytic capacitors features a cylindrical V-chip construction for surface mounting, with a very low impedance and high ripple current at 100kHz. These capacitors are RoHS compliant and suitable for DC-DC converters, DC-AC inverters, and other applications. Key Features Low ESR, low impedance, and high ripple current at […]
74F244/74F244B Octal buffers (3-State)
The 74F244 is an octal buffer ideal for driving bus lines and buffer memory address registers. It features two output enables, each controlling four 3-State outputs, with high capacitive drive characteristics. Key Features: Octal bus interface, 3-State output buffer, 64mA sink and 1SmA source current, and guaranteed output skew less than 2.0ns (74F244B). Reduced ground […]