Mini Air Core Inductors
These small air core inductors feature high Q and tight tolerances, making them suitable for a variety of applications. They have an acrylic jacket that provides a flat top for pick and place, and solder-coated leads ensure reliable soldering. Key Features: RoHS and REACH compliant, with an operating temperature range of -40°C to +125°C. Available […]
GPPO SHROUD 2 HOLE FLANGE MOUNT (TAB DETENT)
Product Overview This datasheet describes the GPPO Shroud 2 Hole Flange Mount (Tab Detent), a product designed for use with hermetic seals, specifically recommended for use with Catalog No. Y007-L42-01 or similar. Key Features The shroud is made of CRES 303 material, passivated, and features a smooth bore interface with full detent. Recommended mounting hole […]
SERIES J RELAY NONLATCH 2 PDT, 12 AMPS ENGINEERING DATA SHEET
Overview The SERIES J relay is a non-latching, 2-pole double-throw (2PDT) device with a 12-amp rating, designed for use in various applications. Key Features Qualified at 10 amps, with a contact arrangement featuring a balanced-force coil and 28 VDC operation. Meets MIL-PRF-83536 standards, with hermetically sealed and corrosion-resistant metal can options available. Operating temperature range: […]
SERIES 420/422 MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT
The Series 420/422 relays are magnetic-latching, TO-5 relays designed for low-level switching from dry circuit to ampere. They are suitable for high-density PC board mounting due to their small size and low coil power dissipation. These relays have proven to be excellent ultraminiature RF switches for frequency ranges well into the UHF spectrum, with features […]
N-Channel RF Amplifier
This datasheet describes the N-Channel RF Amplifier, designed for VHF/UHF amplifier, oscillator, and mixer applications. Absolute Maximum Ratings The device has a maximum drain-source voltage of 25V, gate-source voltage of 25V, and forward gate current of 10mA. Thermal Characteristics The total device dissipation is 625mW, with a thermal resistance junction to case of 725°C/W and […]
UC1856, UC2856, UC3856 Improved Current Mode PWM Controller
Overview The UC1856, UC2856, and UC3856 are high-performance current mode PWM controllers designed for applications requiring speed and accuracy. Key Features These controllers offer pin-for-pin compatibility with the UC3846 series, with improvements including minimized input to output delays, a slew rate limited current sense output, and fast 1.5A peak output stages. They also feature an […]
UC285-1, UC285-2, UC285-3, UC285-ADJ, UC385-1, UC385-2, UC385-3, UC385-ADJ FAST TRANSIENT RESPONSE 5-A LOW-DROPOUT REGULATOR
The UC385 is a low dropout linear regulator that provides a fast response to load changes, making it suitable for driving GTL and BTL buses. It features a maximum dropout voltage of 500 mV at 5 A load current, separate bias (VB) and VIN pins, and is available in fixed or adjustable output voltages. Key […]
UC1823, UC2823, UC3823 High Speed PWM Controller
Overview The UC1823 family of PWM control ICs is designed for high-frequency switched-mode power supply applications, compatible with voltage or current-mode topologies. Key Features These controllers feature a totem pole output, fully latched logic, and a wide bandwidth error amplifier. They also include protection circuitry, such as a current limit comparator, TTL-compatible shutdown port, and […]
JST XA Connector 2.0mm Pitch / Disconnectable Crimp Style Connectors
Overview The JST XA Connector is a 2.0mm pitch, disconnectable crimp style connector designed for various applications. Key Features Secure locking device, solder crack preventive material, low insertion force, and insertion guide mechanism. Applicable to automatic board mounting machines, with polarizing boss for secure connection. Specifications Current rating: 3A AC/DC (AWG #22, #20), voltage rating: […]
Metallized Polyester Film Capacitors (MKT) Series: B32520 B32529
General Purpose Capacitors These metallized polyester film capacitors are designed for general purpose applications, including blocking, coupling, decoupling, and RFI suppression in the automotive industry. Key Features They offer high pulse strength, high contact reliability, and are RoHS-compatible. Halogen-free capacitors are available on request, and the series is AEC-Q200 compliant. The capacitors feature parallel wire […]