2mm SOCKET STRIP ASSEMBLY YTS-IXX-01-X-X-XXX

Category: Connectors, Electronics, Samtec Inc

The datasheet presents technical details for a 2mm SOCKET STRIP ASSEMBLY, designated with the part number series YTS-IXX-01-X-X-XXX.

Revisions and Plot Scale

The sheet includes a plot scale of 15,2 but instructs the reader not to use the print for scaling purposes, emphasizing that critical dimensions are represented.

Dimensional Information

There are specifics on decimal place accuracy:

One place decimals: A[2.5]
Three place decimals: C0.5[.127]
Four place decimals: 0.25[.031]

Additionally, the contact hole’s pushout force should be a minimum of 1 pound, with no cut flash permitted within the contact holes. Cut flash should also not exceed 0.15[.38] in measurement.

Mechanical Properties

The datasheet specifies the contact area plating options, which include light selective gold, tin-lead on tail or post-contact areas, and gold over nickel on the contact area.

Assembly Details

Various components of the assembly are listed, including the appropriate insertion of PK-07-K at specified positions and notes on breakable tabs to accommodate polarization options.

Inspection and Packaging

Inspection stages are outlined (such as ‘in-process’ and ‘final’), and packaging details are provided for different quantities of positions. The datasheet details the types of layers and packaging, including tubes and tube plugs, for product codes ranging from -02-04 to -02-50.

Contact Information

Producer details are provided with an address located in New Albany, Indiana, a phone number, and a post office box for reference.

Document Control

Each section of the document contains positional references and dimensions in inches and millimeters.

Proprietary Notice

A proprietary notice is issued, suggesting that the data within the document is confidential and potentially subject to non-disclosure agreements.

Figures and References

Illustrative figures and relevant reference codes such as C-97-01-% and part number 44724 indicate additional details about the product’s specifications, while indicating a drawing reference to section “AA” for further details.