McLaren 12C TM Roadside Tip Sheet

Jump Start Procedure

To access the front cargo area where the start battery is housed, follow these steps:

1. Open the “Bonnet” or front cargo cover.
2. Remove the HVAC Gasket and 5 Phillips Screws Plastic Fasteners.
3. Remove the surrounding trim panel.

Then, disconnect the CAN plug, connect a 12 Volt Jump Pack or Cables, and start the vehicle. Run the vehicle for 20 minutes to charge the battery.

Reassemble the cargo area in the opposite order of breakdown, making sure to reconnect the CAN Plug before reassembly.

Manual:

Download: McLaren 12C TM Roadside Tip Sheet

Chat: Powered By VoiceSphere