McLaren 12C Roadside Tip Sheet

Jump Start Procedure

To access the front cargo area where the start battery is housed:

Step 1: Remove HVAC Gasket, 5 Phillips Screws, and surrounding trim panel.

Step 2: Remove 4mm Allen Screws and #2 Phillips Screws.

Step 3: Remove cargo liner tub to access the battery.

Step 4: Disconnect CAN plug, connect 12 Volt Jump Pack or Cables, and start the vehicle.

Reassemble the cargo area in the opposite order of breakdown.

Important: Reconnect the CAN Plug before reassembly of the cargo area.

Manual:

Welcome to the 720S Super Series The 720S is a remarkable new standard in supercars,

June 3, 2024

Introduction Welcome to the McLaren 6OOLT, the fastest and most extreme Sports Series car engineered,

May 10, 2024

Service Campaign Bulletin This bulletin addresses a concern with the electronic owner’s manual on some

May 13, 2024

Summary of the Manual The manual provides guidance on improving the track cooling performance of

September 20, 2024

Introduction The McLaren 765LT is a high-performance vehicle that takes the Longtail concept to the

July 21, 2024

Introduction This manual concerns the joint projects between CRS and McLaren for the design, construction,

May 30, 2024

Jump Start Procedure