ERZ4 2R2 5% AMMO PK
Overview This datasheet describes a power resistor with a resistance of 2.2 ohms and a tolerance of 5%. It has an axial leaded configuration and is packaged in an ammo pack. Key Features Voltage Rating: 100 V Power Rating: 3 W Operating Temperature Range: -55°C to 200°C Temperature Coefficient: 0-60 ppm/°C Compliance This product is […]
Coaxial Directional Coupler 502 1 to 2000 MHz ZFDC-10-5+
Overview The ZFDC-10-5+ is a coaxial directional coupler designed for wideband applications from 1 to 2000 MHz. Key Features Very wideband frequency range, excellent directivity (30 dB typical), and rugged shielded case. Applications Cellular, instrumentation, communication receivers and transmitters, GPS, and other applications requiring high directivity and low insertion loss. Electrical Specifications Mainline loss includes […]
Coaxial Bias-Tee Wideband 10 to 4200 MHz
This datasheet describes the ZFBT-4RZG+ and ZFBT-4R2G coaxial bias-tee devices, which operate over a wide frequency range of 10 to 4200 MHz. The devices feature low insertion loss (0.6 dB typ.), good isolation (40 dB typ.), and a maximum RF power handling of 30 dBm. They are suitable for various applications, including biasing amplifiers, laser […]
THICK FILM CHIP RESISTORS AND JUMPERS MC SERIES
Overview RCD Components offers a wide range of thick film chip resistors and jumpers, including the MC series, with industry-low prices and a vast selection of sizes and values. Key Features These resistors utilize precision thick film technology, offering inherently low inductance, exceptional reliability, and superior performance under demanding applications. Options include lead-free solder terminations, […]
Molex Connector Part Number 90121-0932
Overview The C-Grid IIITM PCB Header is a custom, active part with 12 circuits (loaded and maximum). It features a breakaway design and is suitable for signal and wire-to-board applications. Key Features Physical Characteristics: Right-angle PC tail, 2.90mm length, and polyester resin material. Electrical Characteristics: Maximum current per contact is 3.0A, and maximum voltage is […]
Model 90 dc to 18.0 GHz Medium Power Fixed Coaxial Attenuator 50 Watts SMA & N Connectors
Overview This datasheet describes a medium power fixed coaxial attenuator with a frequency range of dc to 18.0 GHz and a maximum power rating of 50 watts. Key Features Precision injection molded connector dielectric designed to meet environmental requirements of MIL-DTL-3933. Flat response with a maximum deviation over frequency of ±0.50 dB to ±1.00 dB. […]
C-GRID III DUAL ROW STRAIGHT PIN HEADER
Product Overview This datasheet describes the C-GRID III Dual Row Straight Pin Header, a product from Molex Incorporated. Key Features The header has a dual row design with straight pins, and is available in various sizes and plating types. It is made of glass-filled polyester with a UL 94V-0 rating and has a black color. […]
YNM12SO5 DC-DC Converter Data Sheet
Overview The YNM12SO5 is a non-isolated DC-DC converter that delivers up to 5 A of output current in an industry-standard surface-mount package. It operates from a 9.6 to 14 VDC input and provides a programmable output voltage of 0.7525 to 5.5 VDC. Key Features High efficiency, no heat sink required, and low-profile design. RoHS lead-free […]
BURNDY Products FC) Compression TYPE YAE-G BOX WIRE CRIMP
INSULUGTM Type YAE-N Nylon Insulated Terminals These terminals feature a multi-finger insulation grip, providing superior insulation holding characteristics, especially on EPR and other elastic-type insulations. They are rated for 300 volts max, 105°C max, and meet military standards MS25036 and MIL-T-7928 (ASG) requirements. Key Features: Deep V groove, inner barrel serrations for optimum conductivity, reliability, […]
YFS-XX-X3-X-XX-XSB-XX Multi-Row Socket Assembly
Overview This datasheet describes the YFS-XX-X3-X-XX-XSB-XX multi-row socket assembly, which is available in various configurations with 3, 5, 6, 8, or 10 positions per row. Key Features The assembly features a phosphor bronze contact, LCP insulator, and a black color. It has a multi-row design with a Kapton pad option and is available in tape […]