Troubleshooting Your Braun Thermoscan
This user manual provides tips for common issues and solutions to ensure your Braun Thermoscan functions correctly. Make sure to check the battery life, probe cover, and proper handling to prevent problems.
Quick Troubleshooting Tips
Device won’t turn on: Check battery placement, clean battery contacts, and replace dead batteries if needed.
Blank screen: Ensure batteries are not dead, check installation, and reset the device by removing and reinserting batteries.
Error messages: Reset the device by removing and reinserting batteries, and ensure correct probe position.
Regularly check and replace batteries to avoid power problems.
Common Display Issues and Solutions
Inaccurate readings: Ensure the probe cover is clean and intact, and use the device in a stable room with no drafts or direct sunlight.
Consistent low or high readings: Check fresh batteries, and reset the thermometer if issues persist.
Probe not fitting properly: Ensure correct probe cover attachment and angle, and inspect the probe for damage.
Cleaning the probe: Remove the probe cover, wipe with a soft cloth and isopropyl alcohol, and allow it to air dry before replacing the cover.
Calibration Issues and Error Codes
Calibration issues can result in inaccurate readings. Regular calibration helps ensure precise temperature measurements.
Common error codes include POS (position error), HI (temperature too high), LO (temperature too low), ERR (general error), and BAT (low battery).
To fix these issues, try repositioning the thermometer, letting it cool down, warming it up, restarting the device, or replacing the batteries.
Regular cleaning and proper storage are also important to prevent build-up and ensure accuracy.
Manual:
Download: Braun Welch Allyn Thermoscan User Manual
Chat: Powered By VoiceSphere