W/Shielded RJ45 Side Entry PCB Jack Top Drawing

Category: Connectors, Electronics, Pulse Electronics Corporation

The provided datasheet snippet contains technical details for an RJ45 side entry Printed Circuit Board (PCB) connector, which is reflected in the title “W/Shielded RJ45 Side Entry PCB Jack Top Drawing,” part number CE563A62-LA. The connector is depicted in its top-view drawing meant for integration with a PCB layout. The drawing is not to be scaled, and tolerance levels, unless stated otherwise, are provided.

Electrical Characteristics:

Voltage Rating: 125 VAC RMS
Current Rating: 1.5 AMP
Contact Resistance: Maximum of 45 milliohms
Insulation Resistance: Minimum of 1000 Megohms at 500 VDC
Dielectric Strength: 1000 VAC RMS at 60Hz for 1 minute

Mechanical Properties:

Housing Material: FR52 with a UL94V-0 rating
Contact Material: Phosphor bronze with 0.35mm thickness
Plating: Gold plating over nickel
Operating Life: Minimum of 750 cycles
PCB Retention: Pre-solder of minimum 1 lb and post-solder of minimum 10 lbs

Environmental and Operating Conditions:

Storage Temperature: From -40°C to +85°C
Operating Temperature: From -40°C to +85°C
Mating: Wave soldering profile within 260°C (for 10 seconds)

Certifications and Standards:

The connector complies with FCC Part 68 Subpart F and is UL listed under file number E163191. It also meets the RoHS compliance requirements for restricted materials.

Physical Dimensions and Coating Options:

A series of plating options are available, including the number of contacts (ranging from 4-10 contacts) and various thicknesses of gold ranging from 3 to 50 microinches. Furthermore, palladium-nickel and pure nickel thicknesses are specified. The drawing indicates the precise dimensions for the PCB Jack, especially significant for ensuring proper fit during the design of electronic devices.

Drawing Details and Approvals:

The drawing was last checked on April 1, 2003, and approved on September 8, 2005, by LUSHENG. The angles are represented through third-angle projection, and the scale is set to 2.5 times the original size. The datasheet exhibits the importance of rigorous standards in manufacturing PCB connectors, taking into account diverse specifications for electrical, mechanical, and environmental conditions.