Surface Mount Aluminum Electrolytic Capacitors NACK Series

Category: Capacitors, Electronics, Nic Components Corp

Overview

This datasheet provides detailed specifications for the NACK Series of surface mount aluminum electrolytic capacitors with cylindrical V-chip construction, which are designed for surface mounting, exhibit very low impedance, and can operate across a wide temperature range (-55°C to +105°C). The series is suitable for automatic mounting and reflow soldering and complies with the AEC-Q200 standards for automotive components. Test data supporting compliance is available upon request from NIC Components Corp. The capacitors are also RoHS compliant, ensuring adherence to environmental standards restricting the use of hazardous substances.

Electrical Characteristics

Rated Voltage Range: 6.3 to 100Vdc
Rated Capacitance Range: 3.3 to 6,800uF
Operating Temperature Range: -55°C to +105°C
Capacitance Tolerance: ±20%(M)
Maximum Leakage Current after 2 minutes: 0.01CV or 3uA, whichever is greater
Tanδ (Dissipation Factor) at 120Hz/20°C: Specified values for different sizes and rated voltages
Low Temperature Stability: The impedance ratio at 120Hz is indicated for low-temperature scenarios
Leakage Current: Less than specified maximum value

Mechanical and Durability Specifications

Load Life Test: Capacitors are tested for 2,000 to 5,000 hours at 105°C, with the criteria that capacitance should remain within +30% of the initial measured value, and Tanδ should be less than 200% of the specified maximum.
Leakage Current: Should not exceed the specified maximum values

Product Options and Availability

The datasheet details an extensive matrix of available capacitances (ranging from 3.3uF to 6,800uF), case sizes, and rated voltage options. Particular emphasis is placed on supporting different automotive equipment needs, with availability noted for a “Y” Control Option. Capacitance change percentages are declared for various operating temperature ranges, consistent with industry standards.

Contact Information

For more information, NIC Components Corp’s contact details and websites are listed: www.niccomp.com, www.lowESR.com, www.RFpassives.com, and www.SMTmagnetics.com. The datasheet notes that specifications are subject to change and the document revision is dated 05/21/2007.