State of the Art, Inc. SASSSATION 3 0603 Thick Film Chip Resistor Datasheet

Category: Electronics, Resistors, State Of The Art Inc

The datasheet presents the SASSSATION 3 0603 Thick Film Chip Resistor series, designed to provide standard-grade, wraparound termination performance. The chip resistors are constructed with 96% alumina for stability and durability.

PERFORMANCE CHARACTERISTICS

The resistors offer a resistance range from 10 to 40MΩ and various tolerances (±0.5% with limited availability, ±1%, ±2%, ±5%, and ±10%). They accommodate temperature coefficient of resistance (TCR) values of +100, +200, and +300 ppm. The maximum working voltage of these resistors is 45 Volts, with a power dissipation capacity of 100 mW and a thermal resistance of 78.4°C/W.

ENVIRONMENTAL PERFORMANCE

Environmental tests such as thermal shock, low-temperature operation, short-time overload, and moisture resistance are detailed, showing typical resistance changes and the methods per MIL-PRF-55342. The life test conditions specify a ±7% limit over 250,000 hours, including power derating starting at 70°C up to 100°C ambient temperature.

CURRENT NOISE & POWER DISSIPATION

Parameters related to current noise and power dissipation are graphically represented; however, specific numerical data is not described within the content provided.

PART NUMBERING & PACKAGING

Detailed part numbering specifies packaging options, temperature characteristics, tolerance identification, resistance value, termination finish, product designation, termination type, size code, and grade. An explanation of the notation for resistance values is provided, including a representation of decimal points and significant digits.

MECHANICAL SPECIFICATIONS

The mechanical section outlines the physical dimensions of the chip resistors in both inches and millimeters, including length, width, thickness, top and bottom terminal gap, and approximate weight with reference to the minimum recommended mounting pads specifications.

MANUFACTURER CONTACT & PRODUCT INFORMATION

State of the Art, Inc. is identified as the manufacturer, with contact information, including an address in State College, PA, phone and fax numbers, a toll-free line, and their website (www.resistor.com). The date on the datasheet is February 8, 2008, and a note indicates that specifications are subject to change without notice.