rfltrc-7-surface-mount-microprocessor-crystal-series-h1oa.pdf

Overview of RFLTRC 7 Series H1OA Microprocessor Crystals

The RFLTRC 7 Series H1OA datasheet details the specifications of a surface-mount microprocessor crystal designed for use in various electronic applications. The crystal is notable for its low profile, providing high accuracy and stability in operations. It is available in a wide range of frequencies, from 10.00 MHz to 200.00 MHz, catering to a broad spectrum of requirements.

Key Specifications and Features

The frequency tolerance value for the crystal can range from ±10 parts per million (PPM) to ±100 PPM at 25°C. Over the entire temperature range, frequency stability can vary from ±4 PPM to ±100 PPM. The microprocessor crystal operates within a temperature range of -40°C to +85°C, with extended options available, and an aging specification of ±2 PPM per year. An equivalent series resistance (ESR) is specified at 130 ohms maximum.

The crystal’s load capacitance ranges from 10 pF to 32 pF or can be set to a series configuration. The shunt capacitance is a minimal 7.0 pF maximum, with a typical drive level of 1.0 ±0.2 mA. Storage temperature recommendations are made clear, with prolonged exposure to a peak of 260°C not surpassing 10 seconds during the solder reflow process, ensuring component integrity and reliability.

Packaging and Part Numbering

The crystals are provided in a packaging format suitable for automated assembly lines, with a standard 250 mm reel diameter, a tape width of 16 mm, and an 8 mm pitch. Each reel includes 1000 pieces, with the part numbering system reflecting the frequency, load capacitance, and tolerance stability, as well as packaging and operation mode features for easy identification.

Additional Information

Important details such as the solder pattern, carrier tape dimensions, and an outline drawing with measurements are outlined to assist in proper application and installation. The material also includes conditions for the solder reflow profile, which are critical for ensuring that the microprocessor crystal is properly attached without damage to the device.

Raltron Electronics Corporation provides the necessary contact information for potential buyers to inquire more about the RFLTRC 7 Series H1OA crystals, with their headquarters located in Miami, Florida, USA. This datasheet emphasizes the crystal’s reliability and precision across a range of conditions, making it suitable for various high-performance electronic applications.

References:

Chat: Powered By VoiceSphere

Pricing & Distributors: https://www.datasheets360.com/part/detail/h10a-20-000-18-f-3030-tr/4474391323483904562/

Related Posts
tx10-15-connectors.pdf
Connectors
user

TX10-15 Connectors

The TX10-15 connectors are designed for independent seizure activation of center and outer conductors, featuring

Read More »
No Thoughts on RFLTRC 7 Surface Mount Microprocessor Crystal Series H1OA