LED-Holder LDR for 5mm T1-3/4 LED with Built-in Resistor

Category: Electronics, Optoelectronics, Schurter Inc

Overview

The datasheet provides detailed information on the LED-Holder LDR designed for 5mm T1-3/4 LEDs with integrated resistors. The main features highlighted include part numbers for various models, dimensions, reflector lenses, and technical data related to mechanical specifications, solderability, soldering heat resistance, and ambient and storage temperatures. Additionally, options for LED colors and voltage ranges are specified.

Variants and Models

Various models are available, distinguished by the absence or presence of a reflector lens and by finish, which can be black, chrome-plated, or not specified. The datasheet lists part numbers corresponding to different combinations of these options. Also specified are the versions with different colored lenses, such as clear glass, red, green, and yellow, with corresponding part numbers for each variant.

Technical Specifications

The LED-Holder LDR operates within voltage ranges of 5-7V, 12-16V, and 24-28V, accommodating red, green, and yellow LED colors respectively, associated with their own part numbers. A securing clip is required for panel mounting these LED holders. Technical data points out mechanical specifications, soldering guidelines with maximum heat and time parameters, and acceptable operating and storage temperature ranges.

Mechanical Data

Mechanical specifications include soldering conditions with a maximum of 2 seconds at a temperature less than 235°C, as per IEC 68 2-20 Test Ta Method 1, and up to 5 seconds at a maximum of 260°C following IEC 68 2-20 Test Tb Method 1A. The ambient temperature range is specified as -25°C to 55°C, and storage temperatures should be within -55°C to +100°C.

Materials and Contact Information

The socket material is identified as Thermoplast. The datasheet also provides contact details for further inquiries, including a phone number, fax number, email address, and the manufacturer’s website.

Notes

The technical data for the LEDs referenced on page 87 is not included within the scope of the first two pages of the datasheet, but interested users are directed there for further information. The datasheet furnishes necessary details for users to decide the suitability of the LED holders for their applications, including part numbers for ordering.