General Information
The datasheet presents information about KEMET’s electronic component, specifically a Ceramic Capacitor with the part number CO4O2C1O1JSGALTU, also identified as CO4O2C1OLJSGAL7867. This component is a Surface-Mounted Device (SMD) in the form of an Multi-Layer Ceramic Capacitor (MLCC), classified under the SMD Commercial COG Tin-Lead (SnPb) series.
The capacitor is noted for its ultra-stable and low loss electrical characteristics, which designate it as a Class I capacitor, suitable for various applications requiring stable, reliable performance. The chip size of the capacitor is 0402, indicating its dimensions, which are explicitly listed as 1mm in length, 0.5mm in width, and a minimum height of 0.3mm, with specific tolerances provided.
Specifications
In terms of electrical properties, the capacitor offers a capacitance of 100 pF with a tolerance of ±5%. The operating voltage is rated at 50 VDC, and the component can withstand voltages up to 125V. Its temperature coefficient is categorized as COG, which allows for a stable capacitance over the temperature range of -55ºC to +125ºC. At 1MHz and 25C, the datasheet lists a dissipation factor of 0.10% and clarifies that there is no aging rate, meaning the component will not experience a change in capacitance over time. The insulation resistance is specified at 100 GOhms, highlighting the component’s reliability.
Packaging Specifications
The capacitors are packaged in a Tape and Reel (TeR) format, specifically using 180mm Paper Tape, and are distributed in quantities of 10,000 units per reel. The datasheet emphasizes the necessity for potential users to have the experience and capability to determine the appropriate products for their applications, stating that the information provided is based on typical operating conditions, and does not constitute a warranty for any specific customer application or use.
Safety and Compliance Information
KEMET indicates that the specified capacitor contains lead (SnPb), with the associated warning concerning cancer and reproductive harm, probably in reference to California’s Proposition 65. The datasheet also mentions the REACH regulation, noting that it contains a Substances of Very High Concern (SVHC) due to the presence of lead (CAS 7439-92-1).
Additional Notes and Warnings
The datasheet highlights that while the capacitors are rated for 50V, they may be operated at 63V. It also states that there is no marking on the component. KEMET provides the information with the disclaimer that they are not responsible for any advice given or results obtained from the use of their products, emphasizing that any technical advice is provided without obligation or liability.
The datasheet was generated on March 12, 2019, with a document reference number of cc23db82-0071-4135-b590-51ee04770ec7.
Manual:
Chat: Powered By VoiceSphere
Pricing & Distributors: https://www.datasheets360.com/part/detail/c0402c101j5galtu/-7995385567326453800/
