C-Grid III Single Row Straight Shrouded Header Specification

Category: Connectors, Electronics, Molex

Summary of the C-Grid III Single Row Straight Shrouded Header

The datasheet provides detailed specifications for the C-Grid III single row straight shrouded headers used in circuit board applications. This product is produced by Molex Electronic Technologies, LLC and features precise measurements crucial for users requiring exact dimensional data for both through-hole and right-angle versions. The datasheet encompasses proprietary information and should not be disseminated without proper authorization from Molex.

Significantly, the document includes notes regarding the materials used for manufacturing, which consist of a 0.650 inch square brass wire for the pin and a 15% glass-filled polyester that is UL 94V-0 certified for the housing. The housing color is defined as black. This product comes with different plating versions, which are elaborated on sheet 2 of the datasheet. End-users are encouraged to use a recommended Printed Circuit Board (PCB) thickness of 1.6mm, and this document also specifies the location where the minimum plating thickness should be measured.

The detailed illustration within the datasheet delineates critical dimensions such as the PCB hole pattern suggested for effective mounting, the extent of the gold plating, and numerous dimensions marked in both metric and inch units for comprehensive understanding regardless of the regional measuring preferences. Additionally, the datasheet highlights the dimensions for various circuit sizes, varying from 1 to 32 circuits, and emphasizes minimum space requirements necessary for correct alignment and fitting of the headers.

For validation and review, the datasheet provides a revision history which indicates the latest update by Drwn: ABABUPS, checked by MRamakrishna, and approved by MRamakrishna, with the release date recorded as October 1, 2019. The dimensions on this multilingual document (notations in several languages) adhere to both the metric and imperial systems, with general tolerances provided unless specified otherwise. Readers are also reminded that the angular tolerances apply as per the draft where appropriate.

Each section of the datasheet is well-structured, providing a clear reference to the relevant section, such as “Section Z-Z” for assessing cross-sections of particular components. The document underlines the importance of maintaining the A3 size of the physical datasheet, suggesting that it should not be resized to guarantee accurate interpretation of the specifications.

Lastly, the document number SDA-90136, PSD 001, indicating its place within the larger product documentation library, categorizes the datasheet for general market use and provides readers with assurance about the propriety and confidentiality of the information contained within.