C-GRID III Single Row Straight Shrouded Header

Category: Connectors, Electronics, Molex

Overview

This datasheet presents information on a C-GRID III single row straight shrouded header, a component used in electronic circuitry. The header is designed for through-hole mounting on printed circuit boards (PCBs) with a recommended PCB thickness of 1.6mm. Detailed dimensions and specifications are provided to ensure proper fit and connectivity in electric circuits.

Physical Characteristics

The datasheet outlines the physical attributes of the header, including key measurements like the recommended PCB hole pattern, the extent of gold plating, and the pitch of the contacts at 2.54mm (0.100 inches). Dimensions such as hole patterns are crucial for ensuring compatibility with the corresponding PCB layout. The gold plating extent is highlighted to indicate the area of superior conductivity.

Material Specifications

Materials used for the header components are specified as follows:

Pins: Made of 0.650/[.0255] square brass wire.

Housing: Comprised of 15% glass-filled polyester UL 94V-0, with the color black.

Plating and Assembly

Information on plating versions is available on sheet 2 of the document (not provided in the content for analysis). The datasheet specifies the measurement point for minimum plating thickness and the solder tail to be gauged.

Additional Information

Notably, the document includes a warning that the drawing contains proprietary information belonging to Molex Electronic Technologies, LLC, and use of this information requires written permission. This establishes the confidentiality and restricted usage of the details shared within the datasheet.

Datasheet Documentation Details

Document Number: SDA-90136

PSD: 001

Material Number: See Table

Sheet Number: 1 of 3

General Market:

Document Status: P1

Release Date: 2019/10/01

Design specifications such as current revision, scale, EC number, drawn by, checked by, and approved by credentials are mentioned with the relevant dates to ensure traceability and verification of the document’s legitimacy and accuracy.

Tolerances and Projections

The datasheet concludes with general tolerances for dimensions and notes about the angular tolerance and third-angle projection used in the drawing. This technical information governs how the part is to be integrated into wider electronic assemblies, ensuring that engineers and manufacturers can maintain quality and precision during production.