C-GRID III Dual Row Straight Shrouded Header

Category: Connectors, Electronics, Molex

Overview

The datasheet describes the C-GRID III product, a dual-row straight shrouded header designed for connection systems in electronic devices. The material composition, dimensions, plating versions, product specifications, and recommended printed circuit board (PCB) thicknesses are itemized for customer reference.

Material Specifications

The datasheet indicates the pins are made from 0.65 square brass wire, and the housing is composed of 15% glass-filled polyester with a UL 94 V-0 flammability rating. The color of the housing is specified as black.

Dimensions

The headers are detailed in multiple dimensions: DIM A, DIM B, and DIM C, with corresponding measurements in both millimeters and inches for various circuit (CKT) sizes. Measurements for the minimum plating thickness and the extent of gold plate coverage are also provided.

Plating and Versions

For details on different plating versions and void versions, users are referred to sheet 2 of the datasheet. There is also a reference to document PS-99020-0001 for product specifications.

PCB Compatibility

A recommended PCB thickness of 1.6 mm is noted, with dimensions for the holes and space level provided. The datasheet includes a section K-K view and a recommended P.C. board hole pattern with precise tolerances detailed.

Proprietary Notice

There is a notice that the drawing within the datasheet contains proprietary information belonging to Molex Electronic Technologies LLC and should not be used without written permission.

Document Information

The datasheet outlines the document number (SDA-90130), type (PSD), revision (001 CA4), and drawing series (90130) along with information about the creation and approval dates. Additionally, it states that general market dimensions must adhere to the A3-size sheet provided within the table of contents. The projection used is the third-angle projection.

An emphasis is placed on general tolerances unless specified otherwise, indicating that the product conforms to specific manufacturing standards.