AMP Z-Pack 2mm HM Spacer Type B – Datasheet

Category: Connectors, Electronics, Te Connectivity

Overview

The datasheet presented refers to the AMP Z-Pack 2mm Hard Metric (HM) Spacer Type B. It specifies the physical characteristics of this electronic component, which is used in conjunction with printed circuit boards (PCBs). The spacers are a crucial element when determining the required space or distance between stacked PCBs.

Design Specifications

The material used for these spacers is an unfilled polyester, colored grey. The dimensions are given in millimeters (mm) and must be interpreted by the third-angle metric projection method, a standard engineering practice for representing three-dimensional objects in two dimensions. The dimension labeled as ‘A’ in the datasheet varies across different part numbers, indicating a variability in spacer height. To select the proper spacer thickness, the user is referred to the application specification 114-19031.

Part Numbering

Part numbers for the Z-Pack 2mm HM Spacer Type B series include -35223-1, 352129-2, 352129-3, 352129-4, 35223-5, 352129-6, and 352129-7. Each part number corresponds to a different dimension ‘A’, catering to various spacing requirements for PCBs.

Datasheet Details and Conditions

The drawing provided within the datasheet is declared as a customer drawing for reference purposes only and will not be updated. Copyright year is marked as 1996 by AMP Holland B.V. It is also stated that AP (All Points) products may be covered by foreign patents, either existing or pending. The drawing is labeled as unpublished and was released for protection and strictly for the company’s internal use.

The datasheet includes a revision record, with the initial revision – EH-0196-96 – being completed on 16-Aug-96 and the latest revision – EH-0582-97 – documented on 24-Jun-97, reflecting changes made to the product design or specifications. Following the company’s document control format (RE-128), the drawing number is identified as C-352129 with the latest revision letter ‘A3’, dated 6-Aug-96.

Schematic Diagram

While the content provided does not include a schematic diagram, references to the dimensions and the graphical representation of the spacers are expected in further pages of the datasheet. These diagrams will typically illustrate the mechanical layout and fitment of the spacer with associated components.