Overview
The provided datasheet presents information regarding a specific type of connector known as AMP-LATCH Universal Ejection-Style Action Pin Headers. These connectors are designed mainly for application in PC-boards ranging from 1.6 to 2.4 mm in thickness. Action-pins play a pivotal role in these headers, and details are provided for the requisite PCB hole-dimensions through a recommended mounting-hole pattern. They are specifically tailored to mate with European-style AMP-LATCH receptacle connectors.
Design Features
The headers are equipped with additional components such as snap-in polarizers, with part numbers 927635-1 or 927637-1, which aid in their application; however, for 10 and 14 position headers, there is no window for snap-in polarizers on one end. An indicator marks the first position to facilitate proper alignment. Special-head mounting screws (PN. 826712-2) and snap-in connector latches are also applicable. Moreover, ejectors with different part numbers are mentioned as compatible accessories.
The connector pin-contact is made from phosphor bronze with a plating of 0.8µ gold over 2.7µ nickel. Additionally, the board-side plating consists of 1.27µ tin over 2.74µ nickel. The housing material is specified as a black thermoplastic polyester. This combination seeks to ensure both optimal conductivity and durability.
Physical Characteristics
The document indicates precise measurements in millimeters for numerous dimensions of the connectors, featuring a typical minimum dimension of 6.35 mm, among other specifics such as action-pin drilled and finished hole dimensions. Clearances and sizes for connector pins and holes are detailed, indicating tolerances and plating thicknesses relevant for manufacturing and application.
Drawing Information and Revision Details
The datasheet includes technical drawings and component specifications authored by W.R. Verbeet on the 26th of November, 1986. The release information notes that the datasheet is intended for publication and any additional revisions will not be updated post-release. Rights and copyrights for the design are reserved under AMP-Holland B.V., and notices pertaining to potential U.S. and foreign patent rights are included. Part numbers relevant to the drawings and associated with various connectors dimensions are also listed.
Manufacturing and Compliance Notes
Instructions on the datasheet make clear that the dimensions should not be scaled and assert the adoption of a third-angle metric projection system. Compliance and compatibility standards for integration with AMP products, potential patent considerations, and international rights are underlined, reinforcing the scope of use and protections for users and manufacturers.
Manual:
Chat: Powered By VoiceSphere
Pricing & Distributors: https://www.datasheets360.com/part/detail/4-215243-0/-3300194824866812285/
