AMP HSSDC to HSSDC CABLE ASSEMBLY DATASHEET

Category: Connectors, Electronics, Te Connectivity

Overview of AMP HSSDC to HSSDC Cable Assembly

The datasheet provides technical details for the AMP Incorporated High-Speed Serial Data Connection (HSSDC) to HSSDC cable assemblies, under the part numbers 1324640-x to 1324640-13, with a revision reference per various dates in 1999. These cable assemblies are designed for applications requiring high-speed data transfer, such as Gigabit Ethernet networks.

Electrical Characteristics

Each assembly is characterized by a 50Ω nominal impedance when measured differentially. The data also include skew limits for lines within a pair and specific voltage ratings for both 400 mV and 600 mV outputs.

Physical Specifications

Physical attributes cover the equalized feedthrough and lengths of various segments of the assembly, provided in meters with detailed tolerances. The maximum coil diameter is capped at 11.0 inches to ensure proper handling and layout. The cable assembly is rated to be tested according to specific Telcordia and SFF (Small Form Factor) documentation, ensuring compatibility with industry standards.

Material and Finish

The assemblies are specified to have a minimum of 0.0050-inch bright tin-lead plating over 0.0025-inch copper. Certain connector positions are stated to be open but defined in FC-PI-3 documentation.

Labelling and Identification

Every cable assembly includes an identification label with key information such as the AMP part number, Date Code, operating specifications, and voltage output levels. The label should be located as shown in the attached schematic. The date code is designed to be interpreted as year/week (e.g., “9542” for the 42nd week of 1995).

Schematic and Document Control

The datasheet contains schematics for the wiring setup of the cable assembly, including the connection details for cable shield connectors and transmit/receive lines. It is noted that the drawing is a controlled document, indicating that revisions and updates are managed formally by AMP Incorporated, Harrisburg, PA.

Additional Notes

Supplementary information regarding the application specification, materials, finish, weight, and customer drawing number (AMP 4805) is provided, and the responsible parties for approval are listed as Morningstar/Llachman.