Overview of F4100 SERIES HCMOS SMD Oscillators
The F4100 SERIES is a set of 3.3V HCMOS surface-mount design (SMD) oscillators that come with a suite of features suitable for an array of electronic applications. These oscillators are distinguished by their operation on a 3.3V supply voltage, RoHS compliance for environmental consideration, and are provided as lead (Pb)-free components in adherence to contemporary manufacturing and environmental standards.
Key Features
Operation Voltage: Each oscillator in the series operates at 3.3V.
Output Type: They offer HCMOS output and include a standby function that allows for power saving when the oscillator is not in active use.
Packaging: These components are packaged in Tape and Reel form, with a standard quantity of 2,000 pieces per reel, facilitating efficient handling and placement in manufacturing processes.
Part Number Selection
There are various configurations of the F4100 series oscillators differentiated by their frequency stability and operating temperature range, with model designations such as F4100, F4100R, F4105, F4105R, F4106, F4106R, F4108, and corresponding frequency specifics indicated by the placeholders “Frequency-Xxxxx.”
Electrical Characteristics
The frequency range of these SMD oscillators stretches from 0.012MHz up to 170.000MHz, catering to a broad spectrum of applications.
To ensure device longevity and reliability, storage temperature range is specified from -55°C to +125°C. The input current requirements vary with frequency, starting from 3mA up to 40mA, reflecting the need for higher driving currents as frequency increases.
Symmetry of the output signal is maintained between 40% to 60% across the frequency range of 50.000MHz to 170.000MHz, ensuring consistent signal quality.
The rise and fall times of the oscillators are also detailed, ranging from 3ns to 6ns, which provides information crucial for timing-sensitive applications.
Supply voltages, signal levels for high ‘VoH’ and low ‘VoL’, and output current capabilities are listed to facilitate proper interfacing with other circuit elements.
Functional Characteristics
The Start-up Time (Ts) ranges from 5ms to 10ms, enabling rapid stabilization upon power-up, while the Output Disable and Enable Times are 150ns and 5ms/10ms respectively, which are crucial for power management and signal control operations.
Jitter, which is an important parameter for communication and timing applications, is specified at a typical value of 0.3pS RMS over a 12kHz to 20MHz band, with Period jitter and Cycle-to-Cycle jitter specified as well.
An enable/disable function allows for better control of the oscillator’s output, and an internal pull-up resistor design ensures an active output if no external signal is provided.
Additional Notes
Critical specifications for the oscillators are defined by size measurements, with the understanding that certain non-critical visual attributes such as side castellations and reference pin shape may vary. The document reinforces the importance of a 0.01pF bypass capacitor between VDD and GND to minimize noise.
This information is complemented by the contact details and global presence of FOX Electronics, highlighting its quality certification and ability to support customers worldwide.
Manual:
Chat: Powered By VoiceSphere
Pricing & Distributors: https://www.datasheets360.com/part/detail/f4105r-4-000mhz-bm0/7798533317660693271/
