Overview
The F4100 SERIES represents a range of surface-mount, HCMOS oscillators that are compliant with RoHS regulations and lead (Pb) free. Fox Electronics manufactures these oscillators, which offer a low-cost and fast delivery alternative with low jitter, branded under the ‘Xpresso’ line.
Product Selection
Part numbers for the F4100 SERIES are constructed based on frequency, stability, and operating temperature range. For example, part numbers might look like “F4100-XXXX” or “F4106R-XXXXX,” where different prefixes and suffixes represent the product’s frequency range, stability in parts per million (PPM), and recommended operating temperature. The product offers a broad frequency range of 0.012 MHz to 170.000 MHz, and even up to 456.520 MHz for certain models, across various temperature ranges.
Electrical Characteristics
Maximum Ratings: The frequency range (Fo) of the F4100 oscillators spans from 0.012 to 170.000 MHz, with a storage temperature tolerance from -55°C to +125°C. The supply voltage (VDD) is rated at 3.3V ±10%. The input current (IDD) varies, increasing from 3mA at 0.012-0.040 MHz to 40mA at 67.000-170.000 MHz.
Output Characteristics: Output symmetry at 50% VDD ranges from 45% to 55% for frequencies up to 50.000 MHz and 40% to 60% beyond. Rise and fall times for the signal range from 6ns at lower frequencies to 3ns at the highest frequencies specified. Output voltage follows a 10% VDD minimum for VOL and a 90% VDD minimum for VOH with a minimum output current of 2mA. The device can drive a load of 15pF (HCMOS).
Dynamic Performance: The oscillator features a standby current of <150nS, a start-up time ranging from 5mS to 10mS depending upon frequency, and an enable time from 5mS to 10mS. The jitter performance criteria promise values such as 0.3pS typical RMS period jitter and 20pS typical cycle-to-cycle jitter inclusive of variations due to tolerance, temperature, voltage, and load changes.
Mechanical Information and Pin Functions
Mechanical dimensions are provided for accurate placement and soldering on a circuit board, along with a recommended solder pad layout to ensure compatibility. Pin functions include ENABLE/DISABLE (Pin 1), GND (Pin 2), OUTPUT (Pin 3), and VDD (Pin 4), with diagrams showing the top and bottom views of the product.
Contact Information
Fox Electronics provides contact details for further inquiries, including phone numbers and fax, with the reminder that all specifications are subject to change without notice.
Manual:
Chat: Powered By VoiceSphere
Pricing & Distributors: https://www.datasheets360.com/part/detail/f4100-160/-5416120064727983055/
