This manual provides instructions for installing an upper tailgate handle on a Land Rover Discovery 3 or 4. The kit includes several components, including a handle bracket, template for panel cutting, handle, tie straps, MSx50 screws, MSx18 screws, wire linear joint, and other tools.
Tools Needed
The following tools are required for the installation:
- Trim removal tool
- Small flat screwdriver
- Phillips screwdriver
- 7mm wrench
- 8mm wrench
- 10mm wrench
- 13mm wrench
- T15 Torx key
- T30 Torx key
- Allen key #4
- Scissors/Cutter
- Paper tape
- Marker
- Drill
- 6mm bit
- 8mm bit
- Jigsaw
- Angle grinder
Installation
The installation process involves several steps, including removing the lower tailgate trim, modifying the subwoofer plate, and installing the handle bracket. The manual provides detailed instructions for each step, including diagrams and pictures.
Manual:
Download: Upper tailgate handle Kit Discovery L319 Cod. LRPOO7004 L319 Installation_guide
Chat: Powered By VoiceSphere
