Overview
This manual provides installation, operation, and maintenance instructions for TopWorx TM D-Series Valve Controllers. The manual is designed to ensure safe and proper installation, maintenance, and operation of the equipment.
Important Safety Information
WARNING: To reduce the risk of death, serious injury, or property damage, personnel installing, maintaining, or operating this equipment must be qualified, must read, understand, and follow these instructions before proceeding.
Installation Notes
Use caution not to allow undue axial (thrust) load on the shaft. Cycle the valve a couple of times prior to final tightening of the mounting kit hardware to allow the shaft to self-center in the pinion slot or coupler.
Calibration Procedure
Never perform switch calibration while an area is known to be hazardous. For intrinsically safe models with Л2И4, the unit must be wired in accordance with the control drawing S-K127 and S-K127A. For intrinsically safe models with Z2И4, the unit must be wired in accordance with the control drawing ES-01743-1 and ES-01744-1.
Manual:
Download: TopWorx TM D-Series Valve Controllers Master Installation, Operation & Maintenance Manual
Chat: Powered By VoiceSphere