Important Pre-Installation Notes
Before installation, check for tire clearance and interference between the body and/or suspension parts. Do not drive the vehicle if interference is found.
Install the center caps, wheel nuts, and TPMS air valves from the original equipment wheels on the new accessory wheels.
Installation Procedure
Apply the parking brake, chock wheels, and raise the vehicle. Remove the original wheels and tires from the vehicle.
Mount the recommended tires on the new alloy wheels, and inflate to specified COLD air pressure. Balance the wheel and tire assemblies per vehicle Service Manual.
Install lug nuts hand-tight, and progressively tighten alternately and evenly in a crossing pattern. Use a calibrated torque wrench, and do not use lubricant on the lug nut or wheel nut seat surfaces.
Re-torque lug nuts to the specified value after 25 miles of driving.
Manual:
Download: Tesla QX30 2016 Alloy Wheel Installation Instructions
Chat: Powered By VoiceSphere
