Tesla Model Y (2021/09 +) Steering Wheel Installation Manual

Important Notes

Before installation, please turn off the vehicle power and do not disassemble any part by yourself to avoid voiding the warranty.

Installation Steps

1. Prepare the necessary tools: steering wheel, large HIO wrench, and 2 flat head screwdrivers.

2. Turn off the host power in the vehicle setting.

3. Remove the airbag and steering wheel plug, then take off the airbag.

4. Screw out the steering wheel screw with a large HIO wrench and pull out the steering wheel.

5. Install the harness of the original steering wheel on the new steering wheel and plug in the plug.

6. Finally, insert the airbag plug and test the speaker and buttons after installation.

Manual:

Introduction This report evaluates the reliability of Tesla Model 3 driver assist functions, focusing on

May 11, 2024

Summary This service bulletin addresses an issue with the accelerator pedal on affected Cybertruck vehicles,

June 20, 2024

Business Overview Tesla designs, develops, manufactures, sells, and leases high-performance fully electric vehicles and energy

May 29, 2024

Condition The Huck BOM fastener and pivot bushing on some Model S and Model X

August 13, 2024

Introduction LOKI is a software and hardware package for diagnostics and maintenance of Tesla vehicles.

June 24, 2024

Introduction This checklist is designed to assist with a delivery day inspection of your new

July 13, 2024

Important Notes