The technical bulletin describes a condition where the front door of a Jaguar vehicle may not close properly due to the outer door handle cable freezing in the sleeve. The affected vehicle range includes the XF (X250), XJ (X351), and XK (X150) models with a model year of 2012-2013.

Affected Vehicles:

  • XF (X250) with VIN: 550323-577552
  • XJ Range (X351) with VIN: V36871-V47979
  • XK Range (X150) with VIN: B47844-B49050

A repair procedure is outlined in the bulletin, which includes replacing the outer door handle cables on both front left and right door latch assemblies. The procedure requires the use of casual part numbers and labor times.

Service Instruction Steps:

Steps 1-4 detail the process for removing and installing the front left door latch assembly. Steps 5-6 detail the process for removing and installing the front right door latch assembly. XK-specific steps are bolded below.

XK Steps:

Steps 1-15 provide detailed instructions for removing and installing the door window motor and trim panel on XK models. The procedure requires additional steps, such as releasing the harness, disconnecting electrical connectors, and removing Torx screws.

Manual:

Download: Jaguar Land Rover North America, LLC Technical Bulletin JTBOO292NAS1: Freezing Latch Door Will Not Close for 2012-2013 XF, XJ, and XK Models

Chat: Powered By VoiceSphere

Top Categories
Recent Manuals

Subscribe

Subscribe for Weekly email digest
Related Posts
No Thoughts on Jaguar Land Rover North America, LLC Technical Bulletin JTBOO292NAS1: Freezing Latch Door Will Not Close for 2012-2013 XF, XJ, and XK Models