Nissan Titan XD 4″ Suspension System Installation Manual
This installation manual is intended for the 2016-2018 Nissan Titan XD with the TUFZ 4″ suspension system. It is essential to review and understand all instructions before starting the installation.
The manual provides step-by-step instructions for the installation of the suspension system, including the removal of the front wheels, skid plate, and swaybar, as well as the installation of the strut pre-load spacers, bearing plate, and rubber isolator ring.
The manual advises the customer to wear safety glasses and to make sure all necessary tools are available before starting the installation. It also recommends that the installer perform a test drive after the installation to check for any unusual sounds or vibrations.
The manual covers important information, including the limited lifetime warranty, the need for periodic re-torqueing, and the recommended tools and hardware bag contents.
Recommended Tools
- Torque wrench
- Standard socket set
- Standard wrench set
- Metric socket set
- Metric wrench set
- Tape measure
- Hydraulic floor jacks
- Wall mounted strut compressor
This manual is a comprehensive guide for installing the 2016-2018 Nissan Titan XD TUFZ 4″ suspension system. It is essential to follow the instructions carefully to ensure a successful installation.
Manual:
Download: Installation Manual 2016-2018 Nissan Titan XD TUFZ 4″ Suspension System Wlupper Control Arms
Chat: Powered By VoiceSphere
