Installation Notes
Warning: Check for tire clearance and interference between the body and/or suspension parts after installation. Do not drive the vehicle if interference is found.
Use only the recommended tire size for this alloy wheel and wheel nuts from the original equipment wheels.
Tools Required
Torque Wrench (100 ft-Ibs), Tire Changer, 21 mm Socket and Wrench, Wheel Balancer, Balance Weights, TPMS air valve tool (12mm)
Installation Procedure
Apply parking brake, chock wheels, and raise the vehicle. Remove the original wheels and tires, and mount the recommended tires on the new alloy wheels.
Inflate the tires to the specified COLD air pressure, balance the wheel and tire assemblies, and inspect the vehicle hub and studs for any damage.
Mount the wheel and tire assembly on the vehicle, install the lug nuts hand-tight, and progressively tighten the lug nuts alternately and evenly in a crossing pattern.
Install the center caps, wipe off any dust and finger marks, and clean the decorative surface.
Re-torque lug nuts to the specified value after 25 miles of driving.
Manual:
Download: INSTALLATION INSTRUCTIONS Alloy Wheel for Q60 Coupe & Q70
Chat: Powered By VoiceSphere