Installation Guide for Land Rover Defender with Duratec 2.4 litre Common-Rail Diesel Engine

Introduction

This installation guide is for the Safari V-SPEC SNORKEL system on a Land Rover Defender with a Duratec 2.4 litre Common-Rail Diesel Engine.

Special Tools Required

Step Drill, Sikaflex 227 adhesive sealant, Pop-rivet gun, Masking Tape, Touch-up paint, Loctite threadlock, and Blue Removable.

Fitting Time

120 minutes.

Before starting the installation, verify that all components are correct, particularly the template (Item 12).

Remove and discard the panel-mounted air intake grille, guard inspection plate, and wheel arch flare according to the factory service manual.

Remove the upper radiator shroud, air cleaner top, air cleaner element, and turbocharger inlet hose according to the factory service manual.

Manual:

Welcome to the Range Rover Sport The Range Rover Sport is a dynamic SUV that

May 7, 2024

The service instruction provides information on a safety recall notice for certain Land Rover vehicles,

October 3, 2024

Welcome to Land Rover Since 1947, Land Rover has been building vehicles that challenge what

May 10, 2024

Welcome to the World of Land Rover Since 1947, Land Rover has built vehicles that

June 19, 2024

Important Information This manual is intended for the installation of Arnott air suspension products on

October 17, 2024

The manual provides information on the deployable towbar hardware and its removal and installation. Specifically,

November 4, 2024

Introduction