Installation Requirements
Before starting the installation, ensure you have a thorough understanding of the process and have all the necessary tools and materials. CAUTION: Failure to follow these instructions may result in serious injury or damage to the vehicle.
Using the provided parts list, verify that all components are present and match the diagram figure A1. Remove any modifications or obstructions in the truck bed, including the spare tire and heat shield.
Step-by-Step Installation
Position the vehicle under the truck bed, and use a lifting device or equipment designed for lifting and positioning vehicles. Mark the location of the 3-1/2″ hole on the truck bed floor, then drill and cut the hole using a hole saw and pilot hole. Remove excess material and install the center section, securely fastening it to the truck frame cross member.
Position the latch pin handle, ensuring it does not interfere with brake lines or other components. Assemble the handle and latch pin handle bracket using 3/8″ carriage bolts and locking flange nuts, then install it over the carriage bolts. Secure the handle with 3/8″ locking flange nuts, tightening to 30 ft. Ibs.
Check the hitch position, ensuring it is parallel to the frame cross member and centered over the hole. Tighten the 5/8″ bolts, then torque them to 150 ft. Ibs. Secure plastic fasteners and handle components according to the instructions.
Manual:
Download: Gooseneck Hitch Installation Instructions, Part #1320, for 2019-2024 RAM 2500 & 3500 Trucks
Chat: Powered By VoiceSphere
