GENUINE Mazda CX-5 USB Cable Set Installation Instructions Manual

Welcome and Safety Information

Thank you for purchasing a Genuine Mazda Accessory. The instructions enclosed are vital to ensure proper installation and use of the USB cable set for the Mazda CX-5 models 16MY and 16.5MY, equipped with MZD Connect. Your safety is of utmost importance; therefore, it is recommended that these instructions be kept with the vehicle records for future reference.

Important Warnings and Cautions

The manual contains several WARNING and CAUTION notes that must be strictly followed to avoid potential severe injuries, accidents, or vehicle damage. A WARNING indicates a risk of serious injury or death if not adhered to, while a CAUTION points out the risks of bodily injury or vehicle damage.

Installation Instructions and Torque Specifications

For specific sections of the installation that require a precise torque, a torque wrench must be used as per the specified torque values. In some areas where the torque value is given inside parentheses, those values are for reference, and using a torque wrench isn’t necessary.

Product Handling and Modifications

The USB cable set should not be modified and must be installed strictly according to the provided guidelines. If in doubt, it is recommended that the customer seeks advice from a Mazda dealer to avoid misuse of the accessory.

Dealer and Installer Responsibility

Mazda emphasizes the importance of the installation, removal, and disposal of the USB cable set being carried out by an Authorized Mazda Dealership to guarantee the safety and reliability of the work. Mazda and its suppliers will not assume responsibility for any harm or damage resulting from installation procedures that deviate from the recommendations stated herein.

Handling Removed Parts and Customer Notice

During installation, care should be taken to avoid losing or damaging removed parts. They must be kept clean and free from scratches, grease, or dirt. After the installation, dealers should hand over these instructions to the customer for their records. In the case of resale, these instructions should remain with the vehicle for the next owner’s reference.

Part Information

Product: USB cable set
Part Number: C922 V6 605
Applicable Vehicle: MAZDA CX-5(16MY/16.5MY) specific to those with MZD Connect.

Note to Dealer and Customer

It is stated that these instructions are to be turned over to the customer following installation and should be kept in case they are needed for future accessory installations or for the removal of the current accessory. The instructions serve as a critical guide for safe and appropriate handling of the Mazda USB cable set accessory.

Manual: