Important Safety Information
This product must be installed exactly as per these instructions using only the hardware supplied.
Do not use this product for any vehicle make or model other than those specified by ARB.
Fitting Kit Contents
The kit includes various components such as front reservoir bracket, bolts, washers, and nuts.
Caution
Ensure VD60030006 M10 x 20mm SEMS is installed above hose fitting to avoid severe damage to the BP-51.
Damper Preparation (Spring Pre-Load Adjustment)
Spring preload must only be adjusted when a spring compressor is used to take load off the preload ring.
Use workshop tool kit VM80020001 to aid spring adjustment.
Vehicle Preparation (Removing Strut)
Use the following steps as a guide to remove strut: remove wheel, support the Lower Control Arm, detach ESC line, and loosen the lower mounting nuts.
Manual:
Download: FORD RANGER P375U FRONT SUSPENSION FITTING INSTRUCTIONS MANUAL
Chat: Powered By VoiceSphere