Important Warnings and Notices
Do not exceed product rating or tow vehicle lamp load rating; whichever is lower. The battery connection must be fuse-protected, 10-amp max. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
Do not lay tools on the positive battery terminal. This can cause a short in the system, sparks and or electrical shocks.
Product Information
This manual provides installation instructions for a wiring harness for Hyundai Entourage, Kia Sedona, Hyundai Tucson, and Hyundai Veloster vehicles.
Required tools include a ratchet, flathead screwdriver, socket, utility knife, wire crimper, electrical tape, wire stripper, Phillips screwdriver, and panel removal tool.
Installation Overview
The installation process involves locating the vehicle’s battery, disconnecting the negative battery terminal, and routing the wiring harness to the desired location.
Specific steps vary depending on the vehicle model, but include removing taillight assemblies, inserting custom wiring ends, and securing wires with cable ties.
It is important to follow all instructions thoroughly and test the product for proper function after installation.
Manual:
Chat: Powered By VoiceSphere
