Important Notes
This installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle.
Be extremely careful not to damage the roof and other finished surfaces of the body when installing the roof rails.
The weight of the cargo must not exceed the maximum weight capacity of 165 lbs (75 kg).
Tools and Supplies Required
Phillips screwdriver, putty knife, ratchet, 10 mm socket, masking tape, torque wrench, ruler, tape measure, felt-tip pen, file, T-15, T-30, and T-40 TORX bits, eye protection (face shield, safety goggles, etc.)
Installation Steps
Attach masking tape to the vehicle, draw a straight line in the center of each piece of masking tape, and remove the plastic cap from the left roof molding.
Remove the nut from the roof stud bolt, remove the left roof molding, and clips, and install the new molding clips to the left roof moldings.
Manual:
Download: 2022 Honda Passport Roof Rails Installation Instructions
Chat: Powered By VoiceSphere
