Important Installation Notes
The gross load capacity for this tow hitch is 5,000 lbs when used as a weight carrying hitch, and 9,000 lbs when used as a straight line pull. It is crucial to not exceed the vehicle manufacturer’s recommended towing capacity.
Installation Steps
Remove tow hooks from the vehicle if present and return them to the customer. Enlarge the existing holes in the frame rails using a 9/16″ drill. Raise the hitch into position and secure it with M12 bolts and conical washers, left loose. Slide CM-SP43 spacers between the frame and hitch side plate, and install 1/2″ bolts and flat washers. Finally, torque all M12 fasteners to 86 Ib-ft and all 1/2″ fasteners to 110 Ib-ft.
Important Safety Reminders
Never exceed the front axle Gross Weight Rating (GAWR), as this can overload the front axle and suspension, resulting in accidents, property damage, and personal injury. Additionally, never use a ball mount or ball as an anchor point for a tow strap or winch cable, as this can cause severe personal injury or death.
Manual:
Download: 2020 TOYOTA TACOMA RECEIVER HITCH INSTALLATION GUIDE
Chat: Powered By VoiceSphere
