Important Notice
This installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle.
Tools and Supplies Required
10 mm Open end wrench, Ratchet, Phillips screwdriver, 8 mm Socket, File, Utility knife, Diagonal cutters, Isopropyl alcohol, Shop towel, and Plastic Trim Tool (TIN SILTRIMTL1O)
Installation Steps
Remove the front bulkhead cover, intake air tube, and negative cable from the battery. Pull each strap and fold down the third row seats. Remove the cargo lid and jack access panel.
Route the control unit harness 14-pin connector and plug it into the vehicle 14-pin connector. Remove the tape to release the vehicle 14-pin connector.
Manual:
Download: 2016 Honda Pilot Trailer Harness Installation Instructions
Chat: Powered By VoiceSphere
