Welcome to the AUTO-BLIP User Manual!
The manual is divided into several sections, including a warning, introduction, tools needed, connections, installation guide, and attention to special instructions.
Warning:
Adjusting the settings of AUTO-BLIP while driving can lead to an accident and/or serious injuries. Changes should only be made when it is safe to do so.
Introduction:
Congratulations on your purchase of AUTO-BLIP. Please take the time to read the entire instruction manual before attempting to install.
Tools Needed:
The tools needed for the installation include needle nose pliers, light, wire cutters, strippers, digital multimeter, and X-Acto knife.
Connections:
The connections include routing the wire harness away from any moving parts, securing the harness to the car manufacturer’s harness for added safety, and soldering or using Posi-tap connectors for the best results.
Installation Guide:
The installation guide includes a signal description, AUTO-BLIP harness color code, WRX wiring connections, and attention to special instructions.
Attention:
Pay special attention to the position of the wires relative to each connector, sensor, or switch and not just the wire color.
Manual:
Download: 2015+ Subaru WRX STI AUTO-BLIP INTELLIGENT DOWNSHIFTS User Manual
Chat: Powered By VoiceSphere