Important Information
Dealer installation is recommended, and instructions may refer to the Service Manual.
CAUTION: Install the splash guards when the ambient temperature is above 60°F (15°C). Do not wash or expose the vehicle to a wet environment for 24 hours after installing the splash guards.
Tools Required
Phillips head short screwdriver, Drill 3 mm (1/8″), and 6mm (1/4″) drill bit, Masking tape, Clean, lint-free wiping cloth, Mild soap water mixture, 90% or greater alcohol.
Installation Procedure
The installation procedure involves preparing the vehicle, drilling holes, removing screws, cleaning the installation surface, and installing the splash guards using spring nuts and Phillips screws. Refer to the figures and instructions for detailed steps.
Manual:
Download: 2013 Infiniti Q50 Splash Guard Front Kit Installation Instructions
Chat: Powered By VoiceSphere
