2010 KIA FORTE ELECTRONIC CRUISE CONTROL Kit INSTALLATION MANUAL

Important Safety Notes

Always disconnect the negative cable from the battery before installation.

Use caution to avoid risk of injury.

Do not use hand-held 2-way transceivers inside the vehicle while driving.

Pre-Installation Checklist

Read the complete installation instructions before starting the installation.

Check the part number of the cruise module label against the part number in the installation instructions.

Be aware of radio codes that might need to be typed in.

Installation Overview

The installation involves connecting the cruise control module to the accelerator pedal, ignition, and clutch switch.

Use a multimeter to measure voltage and solder all wire leads.

Test the car thoroughly before assembling it.

Manual:

KIA is committed to providing quality, innovation, and safety in their vehicles. This guide is

November 12, 2024

This manual provides an overview of the features and functions of the SORENTO vehicle. It

September 25, 2024

The emergency rescue guide manual is designed to familiarize first responders and the towing/roadside assistance

October 13, 2024

Vehicle Feature Tips This manual provides tips and guidelines for using various features of the

May 20, 2024

Vehicle Features and Tips This manual provides tips and guidelines for using various features of

July 3, 2024

Forward Collision-Avoidance Assist (FCA) The FCA system is designed to help alert the driver and,

June 19, 2024

Important Safety Notes