Important Safety Information
Retain these instructions for future reference. Improper installation, adjustment, alteration, service, or maintenance can cause personal injury, loss of life, or damage to property. Installation and service must be performed by a licensed professional installer or a service agency.
The Clean Air Act of 1990 bans the intentional venting of refrigerant (CFCs, HCFCs, and HFCs) as of July 1, 1992. Approved methods of recovery, recycling, or reclaiming must be followed. Fines and/or incarceration may be levied for noncompliance.
Unit Placement and Brazing Line Set to Service Valves
It is critical for proper unit operation to place the outdoor unit on an elevated surface as described in the Unit Placement section. The brazing technique illustrated must be followed to avoid damaging the service valve’s internal seals.
The Two-stage Elite SSB*H4 outdoor units use HFC-410A refrigerant and must be installed with a matching indoor coil and line set as outlined in the Product Specification bulletin.
Manual:
Download: Lennox Elite SSB*H4 Units Installation Instructions
Chat: Powered By VoiceSphere