Important Safety Notes
Improper installation, adjustment, alteration, service or maintenance can cause personal injury, loss of life, or damage to property. Installation and service must be performed by a licensed professional installer or a service agency.
The Clean Air Act of 1990 bans the intentional venting of refrigerant (CFCs, HFCs, and HCFCs) as of July 1992. Approved methods of recovery, recycling or reclaiming must be followed. Fines and/or incarceration may be levied for noncompliance.
Model Number Identification
The XP16 outdoor unit uses HFC-41OA refrigerant and must be installed with a matching indoor blower coil and line set as outlined in the XP16 Lennox Engineering Handbook.
The unit must be matched with an indoor coil as specified in Lennox XP16 Engineering Handbook. Coils previously charged with HCFC-22 must be flushed.
Installation and Servicing
Retain these instructions for future reference. The unit must be installed with care to avoid damaging internal seals and components.
Brazing line set to service valves requires following the brazing technique illustrated to avoid damaging the service valve’s internal seals.
Physical contact with metal edges and corners can result in personal injury. Be aware of and use caution when working near these areas during installation or while servicing this equipment.
Manual:
Download: Lennox Elite Series XP16 Heat Pump Installation Instructions
Chat: Powered By VoiceSphere