Important Safety Instructions
Please read and follow all instructions carefully to ensure your safety and the proper functioning of your new bath tub.
Some important safety precautions include:
- Do not permit children to use this unit without adult supervision.
- Do not operate this unit without the guard over the suction fitting.
- Do not use any attachments not recommended by Eljer.
- Connect the unit to a properly grounded circuit and test it regularly.
Installation and Framing Instructions
Ensure your bath tub is thoroughly inspected before installing and report any damages or missing parts immediately to customer care.
Follow the instructions carefully for proper installation, and make sure to provide adequate support for the weight of the bath tub, water, and bathers.
Refer to the roughing-in drawing and table for suggested opening size and location dimensions for the drain.
Typical Installation
Position the whirlpool into the installation opening, level the deck in both directions, and mark the final position of the underside of the deck.
Remove the whirlpool and attach a 4″ stringer to the studs, with the top of the stringer touching the traced line.
Install drain components to the whirlpool following the drain installation instructions.
Contact Information
For customer service and warranty information, please contact Eljer at 855-815-0004.
Manual:
Chat: Powered By VoiceSphere