Before using the Black & Decker Double Insulated Drill Bit Sharpener, make sure to read and follow all safety rules and instructions. The sharpener is designed to extend the life of your drill bits by sharpening them to the proper shape and angle.
Safety Features
The sharpener has a safety brake that prevents the bit from moving when it is not in use. It also has a built-in timer that ensures the motor turns off after a specified period of time.
Sharpening
To sharpen a drill bit, first set the knob on the sharpener to the neutral position. Then, insert the bit into the sharpener and rotate it clockwise until it stops. Hold the bit steady and push it against the grinding wheel with medium pressure. Release the bit and rotate it counterclockwise to sharpen the other side.
Adjusting the Sharpening Angle
To adjust the sharpening angle, turn the adjusting knob clockwise to increase the angle or counterclockwise to decrease it. This allows you to sharpen bits of different sizes and shapes.
Maintenance and Repair
The sharpener requires minimal maintenance, but it is important to replace the grinding wheel if it becomes worn or damaged. It is also important to ensure that all parts are properly cleaned and lubricated to prevent damage or premature wear.
Important Safety Rules
Always follow the safety rules and instructions provided in the manual when using the sharpener. Failure to do so can result in serious injury or damage to the tool.
Troubleshooting
If you experience any problems with the sharpener, refer to the troubleshooting section of this manual or contact a Black & Decker Service Center for assistance.
Manual:
Download: Black & Decker Double Insulated Drill Bit Sharpener Owner’s Manual
Chat: Powered By VoiceSphere