Important Notice
Thank you for purchasing the Airaid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation.
Your Airaid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping.
Tools and Parts List
Required tools: 10mm Socket, 4mm Socket (stud removal), 5/32″ Allen Wrench
Parts included: AIR-KITS86PA Aluminum Plate, AIR-KITS86H Hardware, 6mm x 60mm Bolts, 6mm Flat Washers, 8 Extension Plates, 6mm x 25mm Flat Head Screws
Installation Instructions
Disconnect negative (-) battery cable.
Remove throttle body air intake system and install spacer using 6mm x 60mm bolts and 6mm flat washers.
Install extension plates using 6mm flat head screws.
Inspect and test throttle linkage for full open and closed travel before driving.
Reinstall the air intake system and reconnect battery cable.
Manual:
Chat: Powered By VoiceSphere