Introduction
The Power+ ECM is a Plug-and-Play add-on Engine Control Module (ECM) that offers additional features not available on a stock engine.
It uses all the factory data, and then enhances the factory settings to optimize your vehicle’s performance.
Features and Benefits
The Power+ ECM offers a power increase over stock throughout the RPM range, but the power is most noticeable in midrange RPM’s.
This greatly improves drivability and performance.
Important Notes
Read all Safety, Warranty, and Installation Instructions before installing this product.
Professional installation is recommended but not required.
Tools Required
Flat Head Screwdriver, 10mm Open-End Wrench, 10mm Socket, 3/8″ Ratchet, 6″ 3/8″ Extension
OPTIONAL: O-Ring Pick, Nylon Pry Tool
Module Installation
The Power+ ECM can be mounted near the air box near the passenger’s side of the engine compartment.
Adhere the module using Velcro or double-sided tape, allowing enough movement to decouple the box comfortably if needed.
Engine Cover Removal
Remove the engine cover by prying the two plastic covers near the front of the engine cover, removing the two 10mm bolts, and gently pulling up on the corners of the engine cover.
Manual:
Download: Alfa Romeo Giulia 2.0L Turbo Power+ ECM Installation Manual
Chat: Powered By VoiceSphere
