McLaren 12C TM Roadside Tip Sheet

Jump Start Procedure

To access the front cargo area where the start battery is housed, follow these steps:

Open the “Bonnet” or front cargo cover.

Remove the HVAC Gasket and 5 Phillips Screws Plastic Fasteners.

Remove the surrounding trim panel.

Then, disconnect the CAN plug, connect a 12 Volt Jump Pack or Cables, and start the vehicle. Run the vehicle for 20 minutes to charge the battery.

Reassemble the cargo area in the opposite order of breakdown, making sure to reconnect the CAN Plug before reassembly.

Manual:

Introduction The McLaren P1 is designed to be the best driver’s car in the world,

May 17, 2024

Important Information Before installing the Akrapovic exhaust system, read the entire manual and ensure you

June 19, 2024

Introduction The McLaren 720S is a high-performance car that embodies the company’s relentless quest to

July 3, 2024

Introducing the McLaren GT The McLaren GT is a revolutionary car that breaks free from

August 12, 2024

Introduction This manual concerns the joint projects between CRS and McLaren for the design, construction,

May 30, 2024

The manual provides instructions for jump-starting the McLaren 12C. To access the start battery, follow

November 1, 2024

Jump Start Procedure