Overview
This document serves as an installation guide for the BRIGGS & STRATTON Infohub Standby Power Wireless Monitoring, model 6517-00. The manual provides step-by-step instructions on how to install the Infohub monitoring kit to standby generators. This advanced monitoring system is designed to offer real-time data and updates regarding the performance and status of a standby generator.
Technical Support
Technical support for the Infohub Wireless Monitoring System is available on weekdays from 8:00 am to 5:00 pm Central Time by calling the Technical Services at 1-833-463-6482.
Kit Contents
The Infohub monitoring kit includes several key components necessary for installation:
- 240V Splitter Harness (A)
- Cellular Unit Wire Harness (B)
- Pass-Through Wire Harness (C)
- Relay Wire (D)
- Interface Board (E)
- Adapter for Liquid-Cooled Unit (F)
- Cellular Unit (G)
- Antenna (H)
- Rubber Grommet
Tools Required for Installation
Besides the components included in the kit, the manual also lists tools required for the installation process:
- Drill with 3/8 inch bit
- Alcohol wipes or other cleaning solution
- Standard and Phillips screwdrivers
- Volt meter or multimeter
- Wire cutter/stripper
- Deburring Tool
- Rust Inhibitor
- Wire Ties
Post-Installation
After the installation is complete, the manual advises to retain the document with the generator operator’s manual for future reference. Additionally, users are counseled to utilize the customer support helpline if any questions or concerns arise during the installation or use of the Infohub system.
Legal Information
The manual concludes with copyright information, emphasizing that the provided content is reserved by the BRIGGS & STRATTON Corporation in Milwaukee, WI, USA, with a document revision code provided for reference.
Manual:
Download: BRIGGS & STRATTON Infohub Standby Power Wireless Monitoring Installation Instructions
Chat: Powered By VoiceSphere