C-GRID I, SINGLE ROW VERTICAL PC BOARD CONNECTOR ASSEMBLY

Category: Connectors, Electronics, Molex

The datasheet provides detailed information on a specific type of connector assembly known as the “C-GRID I, Single Row Vertical PC Board Connector Assembly.” Crucial features include the use of phosphor bronze for the contacts and a 15% glass-filled polyester for the housing, which is black in color. This connector is designed to ensure a reliable connection when used with male pins measuring between 0.635 mm (0.025 in) and 0.701 mm (0.0276 in) in diameter.

Additionally, the document outlines the recommended printed circuit board (PCB) hole pattern for mounting straight pins. It consists of a sequence of holes spaced 2.54 mm apart in one row, reflecting the standards of spacing for electronic components. The holes are designed to accommodate the connector pins’ dimensions, providing secure attachment to the PCB.

For production and assembly, the datasheet includes a section with a cross-sectional view (Section C-C) showing the orientation of the straight pins once inserted into the connector. This visual is essential for understanding the mechanical fit and connection quality.

Alongside the technical specifications, the datasheet provides a product specification number (P5-99020-0001) and references a table (SDA-90147) that might hold additional information relevant to the design or application of the connector. The document emphasizes the importance of adhering to the given specifications for ensuring optimal performance and compatibility with other electronic components.

The datasheet indicates that the dimensional style, scale, and design units are metric, with general tolerances applied unless specified otherwise. An MMI/IN symbol denotes these general tolerances, and third-angle projection symbols are used throughout the document. The specific PCB thickness recommended for the use of this connector is 1.57 mm (0.062 in).

The document carries a warning that the drawing and the information it contains are proprietary to Molex Incorporated and should not be used without written permission. It is also noted that the document contains a revision history, with the last revision made on January 11, 2012 (Rev.6).

As per the datasheet, the individual responsible for creating the document is denoted as “K IDENNEHY,” with the date of creation listed as July 14, 1987, and subsequent checks and approval on July 7, 2005. The document number associated with this datasheet is SDA-90147 and it is identified as sheet number 2, suggesting a multi-page document.