Right Angle Plug Crimp Type Cable 2.6/50 – Technical Data

Category: Connectors, Electronics, Radiall

Overview

The datasheet provides detailed specifications for a Right Angle Plug Crimp Type Cable connector (part number: 90-1200-030) designed for frequencies up to 1.5 GHz, with a nominal impedance of 50 Ω, and compatibility with cable types KX 224, RG 188, and RG 316. This technical document was created on the 31st of May, 1990, designated at issue number 9910B01, published by Radiall.

Key Specifications:

Nominal Impedance: 50 Ω within the frequency range of 0-1.5 GHz.
Temperature Rating: Operable between -35°C and +70°C.
Voltage Standing Wave Ratio (V.S.W.R): Maximum threshold defined by the formula 1.35 multiplied by the frequency in GHz.
RF Insertion Loss: Characterized by a maximum loss of 0.175 times the frequency in GHz decibels (dB).
Voltage Rating: Maximum effective voltage of 500 V.
Dielectric Withstanding Voltage: The minimum effective voltage of 1500 V, with an insulation resistance minimum of 5000 MΩ.

Mechanical and Environmental Characteristics:

Cable Retention: The axial force required is specified to be a minimum of 40 N for a mating end and 15 N for the opposite end.
Mechanical Durability: Rated for 100 mating cycles.
Weight: The total weight of the connector is 13.5 grams.
Recommended Torques: Suggested torque settings for mating and clamp nuts are 15 N·cm each.

Connector Components:

Body: Made of brass with a nickel finish.
Outer Contact: Consists of brass with a finish of gold 0.2 micrometers over nickel.
Center Contact: Made of brass with a white finish.
Insulator: Constructed from polypropylene material.
Gasket: Manufactured using silicone rubber.

Additional Notes:

Information regarding the technical specifications of the Right Angle Plug Crimp Type Cable connector is subject to change without prior notice. Design changes may occur in pursuit of product improvement, and users should stay updated for the latest details to ensure compatibility and performance.