C-Grid III Single Row Straight Pin Header

Category: Connectors, Electronics, Molex

Overview

The datasheet outlines specifications for the C-Grid III Single Row Straight Pin Header, a product manufactured by Molex Electronic Technologies, LLC. This component is designed for high-density applications and follows a proprietary design that should not be used without prior written permission from Molex.

Dimensions and Material

Detailed in the datasheet are various dimensions of the pin header, labeled as “CKT DIM: ‘A'” and “CKT DIM: ‘B’,” which are specified in millimeters with corresponding circuit sizes noted in parentheses. The dimensions are arranged in a sequential order to represent different product variants ranging from 1×1 with a dimension of 2.54mm (100) up to 1×40 with a dimension of 99.06mm (3.900). Additional measurements such as “DIM ‘B’,” “DIM D,” and “DIM ‘C'” also conform to metric values with given tolerances.

The pin header consists of pins made of 0.650/(.0255) square brass wire plated according to detail provided on sheet 2 of the datasheet. The wafer is constructed from 15% glass-filled polyester and conforms to UL 94V-0 standards, with a color specification of black.

Product Information and Manufacturing Standards

It includes the document number (SD-90120-001), product specification number (PS-99020-0001), and the EC number (618808). The current revision level of the document is noted as N7, and the release date of the information is June 10, 2019.

Additional Notes and Recommendations

The notes section advises the reader to refer to sheet 2 for plating details and highlights a recommended printed circuit board (PCB) thickness of 1.6mm. The document features general market applications and stipulates that sheet dimensions must remain A3-size within stated dimensional tolerances.

General Tolerances and Drawing Information

The drawing provides a comprehensive view of the overall tolerances applicable to the product. It employs third-angle projection to detail the component features and construction. The general tolerances, unless specified otherwise, adhere to the standards set by Molex and are integral to the part’s design.

Manufacturing and Component Information

The extent to which the gold plate covers the pin header is specified, along with a recommended PC board hole pattern. Information pertaining to the personnel involved in the drawing’s creation and verification is included, which consists of the drafter’s and approver’s names, checking dates, and the initial revision notes.

Trademark and Proprietary Notice

A proprietary rights statement is included to inform that the drawing and associated data are exclusive to Molex Electronic Technologies, with explicit instructions not to use without permission. This reinforces the importance of adhering to intellectual property guidelines when engaging with the document’s content.